Welcome to SKZ Intelligent Equipment Co. , Ltd. website!
CN
Service Line: +86 15922106410

Home > content

Adjustment of Fast Machining Stirrup Bending Machine In Horizontal Plane
Source: Release Time: 2019-6-24 Hits: Loading ...

The method for adjusting the horizontal direction of the Fast Machining Stirrup Bending Machine is as follows:

(1) An iron bar is embedded in the reserved hole of the base of the Complete Straightening Stirrup Bending Machine, and the upper end has a screw hole, and the horizontal position of the steel bar bending machine is adjusted by the transverse screw.

Fast Machining  Stirrup Bending Machine
Fast Machining Stirrup Bending Machine

(2) Use a special bracket and fasten the bracket to the bottom plate in the foundation reserved pit with screws.

(3) Some adjustment irons are provided with screws that adjust the horizontal movement.

(4) When the anchor bolt is not used, the horizontal position can also be adjusted with the embedded bracket.

whatsapp:+86-15922106410
Email:info@skz-tech.com
Mob:+86-15922106410