Welcome to SKZ Intelligent Equipment Co. , Ltd. website!
Service Line: +86 15922106410

Home > content

Talking About The Operation Process And Advantages Of The Steel Bending Machine
Source: Release Time: 2019-11-18 Hits: Loading ...

The site steel bending machine is controlled by digital. This equipment has the characteristics of simple operation, convenient protection and economical and practical. The machine is a fully automatic intelligent steel bar bending machine, which integrates four functions of straightening, positive bending, reverse bending forming, cutting, trimming and one forming. Less auxiliary labor, fast processing speed, high precision and high processing efficiency. The equipment is especially suitable for use in highways, bridge construction sites, and steel gathering and processing plants. So what are the operating procedures and advantages of the steel bending machine? The following Wire Bending Machine supplier will come to tell you.

Advantages of the construction steel bar bending machine: 1. The automatic steel bar bending machine production equipment, at the same time has the straightening function, a multi-purpose machine. 2, using intelligent control, processing a variety of large shapes, squares, diamond size specifications, polygons and so on. 3, from raw materials to Ma Rong wire forming products, can process cold-rolled, hot-rolled high-strength steel rods. 4, high production efficiency, artificial equivalent of 20 to 30. 5, equipment, practical, only one person to operate, saving a lot of labor. 6, saving raw materials, continuous formation of work on the lack of enhanced head loss. 7. Small footprint, saving straightening work area and cutting work area, can be in a narrow working area. 8, equipment maintenance costs and energy consumption very low cost automatic bending machine and traditional manual semi-mechanical production comparison: traditional semi-mechanical (straight shear bending). In addition, there is a CNC Wire Bending Machine, which is a fully automatic intelligent steel bending machine that integrates four functions of straightening, positive bending, reverse bending forming, cutting, trimming and one forming.

  CNC Wire Bending Machine
CNC Wire Bending Machine

In addition, we also need to know how to maintain the steel bending machine:

1. Input, the output wheel should keep the surface clean and should be cleaned in time.

2. The bearing parts are cleaned and buttered 1 or 2 times a month.

3. The V-belt on the motor should be tight and appropriate. If it is loose, it should be adjusted or replaced in time.

4. Keep the chain clean, check regularly, and add oil to each shift.

5. Check the gearbox once a shift, add enough oil, and replace the oil 1 or 2 times a year.

6. Before the shift, check whether the screws of each part are loose. If it is loose, it should be tightened before starting.

The operating procedure of the steel bending machine is:

First, check whether the mechanical properties are good, the workbench and the bending machine table are kept level; and prepare various mandrel tool stops.

Second, according to the diameter of the processed steel bar and the requirements of the bending machine, the mandrel, the forming shaft, the iron retaining shaft or the variable retaining frame are installed, and the diameter of the mandrel should be 2.5 times the diameter of the reinforcing bar.

Third, check the mandrel, the block, the turntable should be free from damage and cracks, the protective cover is fast and reliable, and it can be operated only after the operation of the empty machine is confirmed.

4. When working, insert one end of the steel bar to be bent in the gap provided by the turntable.

The other end is fixed against the body and pressed by hand to check that the body is fixed.

It is really safe to block the side of the steel bar to start.

5. It is strictly forbidden to replace the mandrel, change the angle and speed control during the operation, and do not add or remove oil.

6. When bending steel bars, it is strictly forbidden to process the diameter, number of roots and mechanical speed of the steel bars exceeding the mechanical specifications.

7. When bending high hardness or low alloy steel bar, the maximum limit diameter should be changed according to the mechanical nameplate and the corresponding mandrel should be exchanged.

8. It is strictly forbidden to stand in the working radius of the curved steel bar and on the side where the fuselage is not fixed. The bent semi-finished products should be stacked neatly and the hooks must not face upwards.

9. When the turntable is reversed, it must be carried out after stopping.

Ten, the operation is completed, the site is cleaned, the machinery is maintained, and the lock box is broken.

The above is the description of the operation process and advantages by the Convenient Stirrup Bending Machine Supplier about the steel bending machine, hoping to help everyone.